Audi Q3 2011> 2.0 TFSI 208bhp remap figures
Thinking of remapping a Audi Q3 2.0 TFSI 208bhp? The standard car makes 208bhp and 300Nm; with a Stage 1 remap from our Leicester workshop we expect around 267bhp and 431Nm, up to +59bhp and +131Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 208 bhp | 267 bhp | +59 bhp |
| Torque | 300 Nm | 431 Nm | +131 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 208 bhp | 300 Nm | |
| Stage 1Maximum software-only performance | 267 bhp | 431 Nm | +59 bhp +131 Nm |
| Stage 1 EcoPerformance with economy in mind | 252 bhp | 421 Nm | +44 bhp +121 Nm |
| Eco mapEconomy first | 248 bhp | 414 Nm | +40 bhp +114 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Q3
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
Engine management is by a Bosch MED17.1.1 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi Q3 2.0 TFSI 208bhp?
We expect 267bhp and 431Nm against 208bhp and 300Nm as standard: up to +59bhp and +131Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi Q3 2.0 TFSI 208bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 252bhp and 421Nm expected. The Eco map is economy first: 248bhp and 414Nm. Both still sit above the standard 208bhp and 300Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Audi Q3 figures
Other petrol variants
All petrol Q3 variants · Q3 2011-2018 overview · All Audi figures