Audi Q3 2014> 1.4T FSI 147bhp remap figures
The Audi Q3 1.4T FSI 147bhp (2014>) is a petrol 1.4L model making 147bhp and 250Nm as standard. After a Stage 1 ECU remap we expect 190bhp and 297Nm - up to 43bhp and 47Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 147 bhp | 190 bhp | +43 bhp |
| Torque | 250 Nm | 297 Nm | +47 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 147 bhp | 250 Nm | |
| Stage 1Maximum software-only performance | 190 bhp | 297 Nm | +43 bhp +47 Nm |
| Stage 1 EcoPerformance with economy in mind | 179 bhp | 293 Nm | +32 bhp +43 Nm |
| Eco mapEconomy first | 176 bhp | 291 Nm | +29 bhp +41 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Q3
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
This car is listed with a Bosch MED17.5.25 engine control unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi Q3 1.4T FSI 147bhp?
We expect 190bhp and 297Nm against 147bhp and 250Nm as standard: up to +43bhp and +47Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi Q3 1.4T FSI 147bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 179bhp and 293Nm expected. The Eco map is economy first: 176bhp and 291Nm. Both still sit above the standard 147bhp and 250Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Audi Q3 figures
Other petrol variants
All petrol Q3 variants · Q3 2011-2018 overview · All Audi figures