Audi Q3 2015> 1.4T FSI 123bhp remap figures
Thinking of remapping a Audi Q3 1.4T FSI 123bhp? The standard car makes 123bhp and 201Nm; with a Stage 1 remap from our Leicester workshop we expect around 185bhp and 290Nm, up to +62bhp and +89Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 123 bhp | 185 bhp | +62 bhp |
| Torque | 201 Nm | 290 Nm | +89 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 123 bhp | 201 Nm | |
| Stage 1Maximum software-only performance | 185 bhp | 290 Nm | +62 bhp +89 Nm |
| Stage 1 EcoPerformance with economy in mind | 170 bhp | 283 Nm | +47 bhp +82 Nm |
| Eco mapEconomy first | 165 bhp | 278 Nm | +42 bhp +77 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Q3
Naturally aspirated petrol engines have no boost to raise, so gains from software alone are more modest than on a turbocharged car and come from fuelling, ignition and throttle response.
Engine management is by a Bosch MED17.5.5 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi Q3 1.4T FSI 123bhp?
We expect 185bhp and 290Nm against 123bhp and 201Nm as standard: up to +62bhp and +89Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi Q3 1.4T FSI 123bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 170bhp and 283Nm expected. The Eco map is economy first: 165bhp and 278Nm. Both still sit above the standard 123bhp and 201Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Audi Q3 figures
Other petrol variants
All petrol Q3 variants · Q3 2011-2018 overview · All Audi figures