Audi Q3 2011> 2.0 TFSI 167bhp remap figures
Stock, this 2011> Audi Q3 petrol (2.0L) produces 167bhp and 279Nm. Our expected figures for a Stage 2 remap are 267bhp and 425Nm, an expected gain of up to 100bhp and 146Nm.
Choose your map
Stage 2 remap figures
Stage 2 builds on Stage 1 with supporting hardware - typically a freer-flowing intake and exhaust or downpipe - and a remap written around those parts. Stage 2 is intended for off-road or competition use.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 167 bhp | 267 bhp | +100 bhp |
| Torque | 279 Nm | 425 Nm | +146 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 167 bhp | 279 Nm | |
| Stage 2Extra power with supporting parts | 267 bhp | 425 Nm | +100 bhp +146 Nm |
Who is the Stage 2 map for?
- Owners who have fitted, or plan to fit, supporting parts such as a freer-flowing intake and exhaust.
- Enthusiast, track and competition cars: Stage 2 is intended for off-road or competition use.
- Drivers who accept that a bigger gain means more of the car has to be checked and prepared first.
What Stage 2 needs
Stage 2 is written around supporting hardware. For an engine like this one that is typically a freer-flowing intake, an upgraded intercooler and a less restrictive downpipe or exhaust. We confirm the exact parts for your car before any work starts.
- A diagnostic check and a read of your ECU come first.
- We look at the condition of the parts that will carry the extra power before we quote.
- Stage 2 is intended for off-road or competition use.
What this means for your Q3
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
The ECU recorded for this variant is a Bosch MED17.1. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 2 questions
How much power does the Stage 2 map give the Audi Q3 2.0 TFSI 167bhp?
We expect 267bhp and 425Nm against 167bhp and 279Nm as standard: up to +100bhp and +146Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
What does a Stage 2 remap need on the Audi Q3 2.0 TFSI 167bhp?
Stage 2 assumes supporting hardware. For an engine like this that is typically a freer-flowing intake, an upgraded intercooler and a less restrictive downpipe or exhaust. We confirm the exact parts for your car before any work starts.
Is Stage 2 for road use?
Stage 2 is intended for off-road or competition use. Tell us how the car is used and we will explain what we can and cannot do for it.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Audi Q3 figures
Other petrol variants
All petrol Q3 variants · Q3 2011-2018 overview · All Audi figures