Volkswagen Passat (B6) 2005-2011 3.2 V6 FSI 246bhp remap figures
The Volkswagen Passat 3.2 V6 FSI 246bhp (2005-2011) is a petrol 3.2L model making 246bhp and 320Nm as standard. After a Stage 1 ECU remap we expect 271bhp and 351Nm - up to 25bhp and 31Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 246 bhp | 271 bhp | +25 bhp |
| Torque | 320 Nm | 351 Nm | +31 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 246 bhp | 320 Nm | |
| Stage 1Maximum software-only performance | 271 bhp | 351 Nm | +25 bhp +31 Nm |
| Stage 1 EcoPerformance with economy in mind | 265 bhp | 349 Nm | +19 bhp +29 Nm |
| Eco mapEconomy first | 263 bhp | 347 Nm | +17 bhp +27 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Passat
Naturally aspirated petrol engines have no boost to raise, so gains from software alone are more modest than on a turbocharged car and come from fuelling, ignition and throttle response.
Engine management is by a Bosch ME9.1.1 unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Volkswagen Passat 3.2 V6 FSI 246bhp?
We expect 271bhp and 351Nm against 246bhp and 320Nm as standard: up to +25bhp and +31Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Volkswagen Passat 3.2 V6 FSI 246bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 265bhp and 349Nm expected. The Eco map is economy first: 263bhp and 347Nm. Both still sit above the standard 246bhp and 320Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Volkswagen Passat figures
Other petrol variants
- 2.0 TFSI 197bhp 2005-2011
- 2.0 TSI 197bhp 2005-2011
- 3.6 V6 r36 295bhp 2005-2011
- 1.8 TSI 157bhp 2005-2011
- 2.0 FSI 147bhp 2005-2011
- 1.4 TSI 120bhp 2005-2011
- 1.6 FSI 113bhp 2005-2011
All petrol Passat (B6) variants · Passat (B6) 2005-2011 overview · All Volkswagen figures