Volkswagen Passat (B6) 2005-2011 2.0 TFSI 197bhp remap figures
Thinking of remapping a Volkswagen Passat 2.0 TFSI 197bhp? The standard car makes 197bhp and 281Nm; with a Stage 1 remap from our Leicester workshop we expect around 260bhp and 360Nm, up to +63bhp and +79Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 197 bhp | 260 bhp | +63 bhp |
| Torque | 281 Nm | 360 Nm | +79 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 197 bhp | 281 Nm | |
| Stage 1Maximum software-only performance | 260 bhp | 360 Nm | +63 bhp +79 Nm |
| Stage 1 EcoPerformance with economy in mind | 244 bhp | 354 Nm | +47 bhp +73 Nm |
| Eco mapEconomy first | 239 bhp | 350 Nm | +42 bhp +69 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Passat
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
Engine management is by a Bosch ME9.1 unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Volkswagen Passat 2.0 TFSI 197bhp?
We expect 260bhp and 360Nm against 197bhp and 281Nm as standard: up to +63bhp and +79Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Volkswagen Passat 2.0 TFSI 197bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 244bhp and 354Nm expected. The Eco map is economy first: 239bhp and 350Nm. Both still sit above the standard 197bhp and 281Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Volkswagen Passat figures
Other petrol variants
- 2.0 TSI 197bhp 2005-2011
- 1.8 TSI 157bhp 2005-2011
- 3.2 V6 FSI 246bhp 2005-2011
- 2.0 FSI 147bhp 2005-2011
- 1.4 TSI 120bhp 2005-2011
- 1.6 FSI 113bhp 2005-2011
- 3.6 V6 r36 295bhp 2005-2011
All petrol Passat (B6) variants · Passat (B6) 2005-2011 overview · All Volkswagen figures