Audi A3 (8V) 2013> E-Tron 204bhp remap figures
Thinking of remapping a Audi A3 E-Tron 204bhp? The standard car makes 204bhp and 350Nm; with a Stage 1 remap from our Leicester workshop we expect around 273bhp and 476Nm, up to +69bhp and +126Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 204 bhp | 273 bhp | +69 bhp |
| Torque | 350 Nm | 476 Nm | +126 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 204 bhp | 350 Nm | |
| Stage 1Maximum software-only performance | 273 bhp | 476 Nm | +69 bhp +126 Nm |
| Stage 1 EcoPerformance with economy in mind | 256 bhp | 466 Nm | +52 bhp +116 Nm |
| Eco mapEconomy first | 250 bhp | 460 Nm | +46 bhp +110 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your A3
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
Engine management is by a Bosch MEDC17.1.21 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi A3 E-Tron 204bhp?
We expect 273bhp and 476Nm against 204bhp and 350Nm as standard: up to +69bhp and +126Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi A3 E-Tron 204bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 256bhp and 466Nm expected. The Eco map is economy first: 250bhp and 460Nm. Both still sit above the standard 204bhp and 350Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Audi A3 figures
Other petrol variants
- 2.0 TFSI 187bhp 2016>
- 1.8 TFSi 177bhp 2012>
- 1.4 TFSI 147bhp 2014>
- 1.5 TSI 147bhp 2017-2019
- 1.4 TSI 138bhp 2012>
- 1.4 TFSI 123bhp 2014>
- 1.4 TSI 120bhp 2012>
- 1.0 TFSI 113bhp 2016>
- 1.2 TFSI 108bhp 2014>
- 1.2 TFSI 103bhp 2013>
All petrol A3 (8V) variants · A3 (8V) 2012-2019 overview · All Audi figures