Audi A3 (8V) 2016> 2.0 TFSI 187bhp remap figures
Stock, this 2016> Audi A3 petrol (2.0L) produces 187bhp and 320Nm. Our expected figures for a Stage 1 remap are 255bhp and 412Nm, an expected gain of up to 68bhp and 92Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 187 bhp | 255 bhp | +68 bhp |
| Torque | 320 Nm | 412 Nm | +92 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 187 bhp | 320 Nm | |
| Stage 1Maximum software-only performance | 255 bhp | 412 Nm | +68 bhp +92 Nm |
| Stage 1 EcoPerformance with economy in mind | 238 bhp | 405 Nm | +51 bhp +85 Nm |
| Eco mapEconomy first | 233 bhp | 400 Nm | +46 bhp +80 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your A3
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
The ECU recorded for this variant is a Bosch MG1CS111. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi A3 2.0 TFSI 187bhp?
We expect 255bhp and 412Nm against 187bhp and 320Nm as standard: up to +68bhp and +92Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi A3 2.0 TFSI 187bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 238bhp and 405Nm expected. The Eco map is economy first: 233bhp and 400Nm. Both still sit above the standard 187bhp and 320Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Audi A3 figures
Other petrol variants
- 1.8 TFSi 177bhp 2012>
- E-Tron 204bhp 2013>
- 1.4 TFSI 147bhp 2014>
- 1.5 TSI 147bhp 2017-2019
- 1.4 TSI 138bhp 2012>
- 1.4 TFSI 123bhp 2014>
- 1.4 TSI 120bhp 2012>
- 1.0 TFSI 113bhp 2016>
- 1.2 TFSI 108bhp 2014>
- 1.2 TFSI 103bhp 2013>
All petrol A3 (8V) variants · A3 (8V) 2012-2019 overview · All Audi figures