Audi A3 (8V) 2013> 1.2 TFSI 103bhp remap figures
Thinking of remapping a Audi A3 1.2 TFSI 103bhp? The standard car makes 103bhp and 175Nm; with a Stage 1 remap from our Leicester workshop we expect around 130bhp and 215Nm, up to +27bhp and +40Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 103 bhp | 130 bhp | +27 bhp |
| Torque | 175 Nm | 215 Nm | +40 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 103 bhp | 175 Nm | |
| Stage 1Maximum software-only performance | 130 bhp | 215 Nm | +27 bhp +40 Nm |
| Stage 1 EcoPerformance with economy in mind | 123 bhp | 212 Nm | +20 bhp +37 Nm |
| Eco mapEconomy first | 121 bhp | 210 Nm | +18 bhp +35 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your A3
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
Engine management is by a Continental Simos 10.12 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi A3 1.2 TFSI 103bhp?
We expect 130bhp and 215Nm against 103bhp and 175Nm as standard: up to +27bhp and +40Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi A3 1.2 TFSI 103bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 123bhp and 212Nm expected. The Eco map is economy first: 121bhp and 210Nm. Both still sit above the standard 103bhp and 175Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Audi A3 figures
Other petrol variants
- 1.2 TFSI 108bhp 2014>
- 1.0 TFSI 113bhp 2016>
- 1.4 TSI 120bhp 2012>
- 1.4 TFSI 123bhp 2014>
- 1.4 TSI 138bhp 2012>
- 1.4 TFSI 147bhp 2014>
- 1.5 TSI 147bhp 2017-2019
- 1.8 TFSi 177bhp 2012>
- 2.0 TFSI 187bhp 2016>
- E-Tron 204bhp 2013>
All petrol A3 (8V) variants · A3 (8V) 2012-2019 overview · All Audi figures