Volkswagen Polo (6R) 2012> 1.4 TSI 138bhp remap figures
Stock, this 2012> Volkswagen Polo petrol (1.4L) produces 138bhp and 250Nm. Our expected figures for a Stage 1 remap are 183bhp and 340Nm, an expected gain of up to 45bhp and 90Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 138 bhp | 183 bhp | +45 bhp |
| Torque | 250 Nm | 340 Nm | +90 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 138 bhp | 250 Nm | |
| Stage 1Maximum software-only performance | 183 bhp | 340 Nm | +45 bhp +90 Nm |
| Stage 1 EcoPerformance with economy in mind | 172 bhp | 333 Nm | +34 bhp +83 Nm |
| Eco mapEconomy first | 168 bhp | 328 Nm | +30 bhp +78 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Polo
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
This car is listed with a Bosch MED17.5.21 engine control unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Volkswagen Polo 1.4 TSI 138bhp?
We expect 183bhp and 340Nm against 138bhp and 250Nm as standard: up to +45bhp and +90Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Volkswagen Polo 1.4 TSI 138bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 172bhp and 333Nm expected. The Eco map is economy first: 168bhp and 328Nm. Both still sit above the standard 138bhp and 250Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Volkswagen Polo figures
Other petrol variants
- 1.4 TSI 147bhp 2014>
- 1.0 TSI 108bhp 2015>
- 1.2 TSI 103bhp 2009-2014
- 1.2 TSI 103bhp 2015>
- 1.4 TSI 177bhp 2009>
- 1.0 TSI 95bhp 2015>
- 1.2 TSI 88bhp 2009-2014
- 1.2 TSI 88bhp 2015>
- 1.8 TSI GTi 192bhp 2014>
- 1.4 83bhp 2009>
All petrol Polo (6R) variants · Polo (6R) 2009-2018 overview · All Volkswagen figures