Volkswagen Polo (6R) 2015> 1.2 TSI 103bhp remap figures
Thinking of remapping a Volkswagen Polo 1.2 TSI 103bhp? The standard car makes 103bhp and 175Nm; with a Stage 1 remap from our Leicester workshop we expect around 135bhp and 215Nm, up to +32bhp and +40Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 103 bhp | 135 bhp | +32 bhp |
| Torque | 175 Nm | 215 Nm | +40 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 103 bhp | 175 Nm | |
| Stage 1Maximum software-only performance | 135 bhp | 215 Nm | +32 bhp +40 Nm |
| Stage 1 EcoPerformance with economy in mind | 127 bhp | 212 Nm | +24 bhp +37 Nm |
| Eco mapEconomy first | 124 bhp | 210 Nm | +21 bhp +35 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Polo
On a turbocharged petrol engine a remap adjusts boost, ignition timing and fuelling together, so both power and mid-range torque rise and the car pulls harder out of corners and junctions.
The ECU recorded for this variant is a Bosch MED17.5.25. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Volkswagen Polo 1.2 TSI 103bhp?
We expect 135bhp and 215Nm against 103bhp and 175Nm as standard: up to +32bhp and +40Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Volkswagen Polo 1.2 TSI 103bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 127bhp and 212Nm expected. The Eco map is economy first: 124bhp and 210Nm. Both still sit above the standard 103bhp and 175Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Volkswagen Polo figures
Other petrol variants
- 1.2 TSI 103bhp 2009-2014
- 1.0 TSI 108bhp 2015>
- 1.0 TSI 95bhp 2015>
- 1.2 TSI 88bhp 2009-2014
- 1.2 TSI 88bhp 2015>
- 1.4 83bhp 2009>
- 1 73bhp 2014>
- 1.2 69bhp 2009>
- 1.4 TSI 138bhp 2012>
- 1 59bhp 2014>
All petrol Polo (6R) variants · Polo (6R) 2009-2018 overview · All Volkswagen figures