Volkswagen Passat (B6) 2005-2008 2.0 TDI PD 138bhp remap figures
Thinking of remapping a Volkswagen Passat 2.0 TDI PD 138bhp? The standard car makes 138bhp and 320Nm; with a Stage 1 remap from our Leicester workshop we expect around 193bhp and 412Nm, up to +55bhp and +92Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 138 bhp | 193 bhp | +55 bhp |
| Torque | 320 Nm | 412 Nm | +92 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 138 bhp | 320 Nm | |
| Stage 1Maximum software-only performance | 193 bhp | 412 Nm | +55 bhp +92 Nm |
| Stage 1 EcoPerformance with economy in mind | 179 bhp | 405 Nm | +41 bhp +85 Nm |
| Eco mapEconomy first | 175 bhp | 400 Nm | +37 bhp +80 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Passat
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
The ECU recorded for this variant is a Siemens PPD1. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Volkswagen Passat 2.0 TDI PD 138bhp?
We expect 193bhp and 412Nm against 138bhp and 320Nm as standard: up to +55bhp and +92Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Volkswagen Passat 2.0 TDI PD 138bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 179bhp and 405Nm expected. The Eco map is economy first: 175bhp and 400Nm. Both still sit above the standard 138bhp and 320Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Volkswagen Passat figures
Other diesel variants
- 2.0 TDI CR 138bhp 2009-2011
- 2.0 TDI PD 167bhp 2005-2008
- 2.0 TDI CR 108bhp 2009-2011
- 2.0 TDI CR 170bhp 2009-2011
- 1.6 TDI CR 103bhp 2005-2011
- 1.9 TDI PD 103bhp 2005-2011
All diesel Passat (B6) variants · Passat (B6) 2005-2011 overview · All Volkswagen figures