Volkswagen Passat (B5) 2000-2005 2.8 V6 190bhp remap figures
The Volkswagen Passat 2.8 V6 190bhp (2000-2005) is a petrol 2.8L model making 190bhp and 281Nm as standard. After a Stage 1 ECU remap we expect 213bhp and 302Nm - up to 23bhp and 21Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 190 bhp | 213 bhp | +23 bhp |
| Torque | 281 Nm | 302 Nm | +21 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 190 bhp | 281 Nm | |
| Stage 1Maximum software-only performance | 213 bhp | 302 Nm | +23 bhp +21 Nm |
| Stage 1 EcoPerformance with economy in mind | 207 bhp | 300 Nm | +17 bhp +19 Nm |
| Eco mapEconomy first | 205 bhp | 299 Nm | +15 bhp +18 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Passat
Naturally aspirated petrol engines have no boost to raise, so gains from software alone are more modest than on a turbocharged car and come from fuelling, ignition and throttle response.
Engine management is by a Bosch ME7.5 unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Volkswagen Passat 2.8 V6 190bhp?
We expect 213bhp and 302Nm against 190bhp and 281Nm as standard: up to +23bhp and +21Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Volkswagen Passat 2.8 V6 190bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 207bhp and 300Nm expected. The Eco map is economy first: 205bhp and 299Nm. Both still sit above the standard 190bhp and 281Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Volkswagen Passat figures
Other petrol variants
- 2.8 V6 193bhp 1996-2001
- 2.3 V5 170bhp 2000-2005
- 1.8T 20V 150bhp 2000-2005
- 2.0 20v 130bhp 2000-2005
- 2.0 8v 115bhp 2000-2005
- 4.0 W8 271bhp 2000-2005
All petrol Passat (B5) variants ยท Passat (B5) 1996-2005 overview ยท All Volkswagen figures
