Mercedes-Benz Trucks Atego 1998> 815 150bhp remap figures
Thinking of remapping a Mercedes-Benz Trucks Atego 815 150bhp? The standard car makes 150bhp and 580Nm; with a Stage 1 remap from our Leicester workshop we expect around 181bhp and 669Nm, up to +31bhp and +89Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 150 bhp | 181 bhp | +31 bhp |
| Torque | 580 Nm | 669 Nm | +89 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 150 bhp | 580 Nm | |
| Stage 1Maximum software-only performance | 181 bhp | 669 Nm | +31 bhp +89 Nm |
| Stage 1 EcoPerformance with economy in mind | 173 bhp | 662 Nm | +23 bhp +82 Nm |
| Eco mapEconomy first | 171 bhp | 657 Nm | +21 bhp +77 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Atego
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Temic unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Mercedes-Benz Trucks Atego 815 150bhp?
We expect 181bhp and 669Nm against 150bhp and 580Nm as standard: up to +31bhp and +89Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Mercedes-Benz Trucks Atego 815 150bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 173bhp and 662Nm expected. The Eco map is economy first: 171bhp and 657Nm. Both still sit above the standard 150bhp and 580Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Mercedes-Benz Trucks Atego figures
Other diesel variants
- 1015 150bhp 1998>
- 1215 150bhp 1998>
- 715 150bhp 1998>
- 915 150bhp 1998>
- 1216 156bhp 2004>
- 1016 156bhp 2004>
- 716 156bhp 2004>
- 816 156bhp 2004>
- 916 156bhp 2004>
- 1017 170bhp 1998-2004
All diesel Atego variants · Atego 1998> overview · All Mercedes-Benz Trucks figures