Mercedes-Benz Trucks Atego 1998> 715 150bhp remap figures
Thinking of remapping a Mercedes-Benz Trucks Atego 715 150bhp? The standard car makes 150bhp and 580Nm; with a Stage 1 remap from our Leicester workshop we expect around 181bhp and 669Nm, up to +31bhp and +89Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 150 bhp | 181 bhp | +31 bhp |
| Torque | 580 Nm | 669 Nm | +89 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 150 bhp | 580 Nm | |
| Stage 1Maximum software-only performance | 181 bhp | 669 Nm | +31 bhp +89 Nm |
| Stage 1 EcoPerformance with economy in mind | 173 bhp | 662 Nm | +23 bhp +82 Nm |
| Eco mapEconomy first | 171 bhp | 657 Nm | +21 bhp +77 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Atego
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
The ECU recorded for this variant is a Temic. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Mercedes-Benz Trucks Atego 715 150bhp?
We expect 181bhp and 669Nm against 150bhp and 580Nm as standard: up to +31bhp and +89Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Mercedes-Benz Trucks Atego 715 150bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 173bhp and 662Nm expected. The Eco map is economy first: 171bhp and 657Nm. Both still sit above the standard 150bhp and 580Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Mercedes-Benz Trucks Atego figures
Other diesel variants
- 1015 150bhp 1998>
- 1215 150bhp 1998>
- 815 150bhp 1998>
- 915 150bhp 1998>
- 1216 156bhp 2004>
- 1016 156bhp 2004>
- 716 156bhp 2004>
- 816 156bhp 2004>
- 916 156bhp 2004>
- 1017 170bhp 1998-2004
All diesel Atego variants · Atego 1998> overview · All Mercedes-Benz Trucks figures