Mercedes-Benz Vito (W639) 2004-2010 115 CDi 150bhp remap figures
Stock, this 2004-2010 Mercedes-Benz Vito diesel (2.1L) produces 150bhp and 330Nm. Our expected figures for a Stage 1 remap are 205bhp and 412Nm, an expected gain of up to 55bhp and 82Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 150 bhp | 205 bhp | +55 bhp |
| Torque | 330 Nm | 412 Nm | +82 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 150 bhp | 330 Nm | |
| Stage 1Maximum software-only performance | 205 bhp | 412 Nm | +55 bhp +82 Nm |
| Stage 1 EcoPerformance with economy in mind | 191 bhp | 405 Nm | +41 bhp +75 Nm |
| Eco mapEconomy first | 187 bhp | 401 Nm | +37 bhp +71 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Vito
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Bosch EDC16C2/CP31 unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Mercedes-Benz Vito 115 CDi 150bhp?
We expect 205bhp and 412Nm against 150bhp and 330Nm as standard: up to +55bhp and +82Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Mercedes-Benz Vito 115 CDi 150bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 191bhp and 405Nm expected. The Eco map is economy first: 187bhp and 401Nm. Both still sit above the standard 150bhp and 330Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Mercedes-Benz Vito figures
Other diesel variants
- 116 CDi 163bhp 2010>
- 113 CDi 134bhp 2010>
- 111 CDi 109bhp 2004-2010
- 120 CDi 204bhp 2004-2010
- 110 CDi 95bhp 2010>
- 109 CDi 88bhp 2004-2010
- 122 CDi 221bhp 2010>
All diesel Vito (W639) variants · Vito (W639) 2004-2015 overview · All Mercedes-Benz figures