Mercedes-Benz Vito (W639) 2004-2010 111 CDi 109bhp remap figures
The Mercedes-Benz Vito 111 CDi 109bhp (2004-2010) is a diesel 2.1L model making 109bhp and 270Nm as standard. After a Stage 1 ECU remap we expect 190bhp and 406Nm - up to 81bhp and 136Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 109 bhp | 190 bhp | +81 bhp |
| Torque | 270 Nm | 406 Nm | +136 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 109 bhp | 270 Nm | |
| Stage 1Maximum software-only performance | 190 bhp | 406 Nm | +81 bhp +136 Nm |
| Stage 1 EcoPerformance with economy in mind | 170 bhp | 395 Nm | +61 bhp +125 Nm |
| Eco mapEconomy first | 163 bhp | 388 Nm | +54 bhp +118 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Vito
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Bosch EDC16C2/CP31. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Mercedes-Benz Vito 111 CDi 109bhp?
We expect 190bhp and 406Nm against 109bhp and 270Nm as standard: up to +81bhp and +136Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Mercedes-Benz Vito 111 CDi 109bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 170bhp and 395Nm expected. The Eco map is economy first: 163bhp and 388Nm. Both still sit above the standard 109bhp and 270Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Mercedes-Benz Vito figures
Other diesel variants
- 110 CDi 95bhp 2010>
- 109 CDi 88bhp 2004-2010
- 113 CDi 134bhp 2010>
- 115 CDi 150bhp 2004-2010
- 116 CDi 163bhp 2010>
- 120 CDi 204bhp 2004-2010
- 122 CDi 221bhp 2010>
All diesel Vito (W639) variants · Vito (W639) 2004-2015 overview · All Mercedes-Benz figures