Mercedes-Benz GLE 2015> 500e 442bhp remap figures
Stock, this 2015> Mercedes-Benz GLE petrol (3.0L) produces 442bhp and 649Nm. Our expected figures for a Stage 1 remap are 515bhp and 751Nm, an expected gain of up to 73bhp and 102Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 442 bhp | 515 bhp | +73 bhp |
| Torque | 649 Nm | 751 Nm | +102 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 442 bhp | 649 Nm | |
| Stage 1Maximum software-only performance | 515 bhp | 751 Nm | +73 bhp +102 Nm |
| Stage 1 EcoPerformance with economy in mind | 497 bhp | 743 Nm | +55 bhp +94 Nm |
| Eco mapEconomy first | 491 bhp | 738 Nm | +49 bhp +89 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your GLE
Naturally aspirated petrol engines have no boost to raise, so gains from software alone are more modest than on a turbocharged car and come from fuelling, ignition and throttle response.
This car is listed with a Bosch MED17.7.3.1 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Mercedes-Benz GLE 500e 442bhp?
We expect 515bhp and 751Nm against 442bhp and 649Nm as standard: up to +73bhp and +102Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Mercedes-Benz GLE 500e 442bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 497bhp and 743Nm expected. The Eco map is economy first: 491bhp and 738Nm. Both still sit above the standard 442bhp and 649Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Mercedes-Benz GLE figures
Other petrol variants
All petrol GLE variants · GLE 2015> overview · All Mercedes-Benz figures