Mercedes-Benz GLE 2015> 450 367bhp remap figures
The Mercedes-Benz GLE 450 367bhp (2015>) is a petrol 3.0L model making 367bhp and 521Nm as standard. After a Stage 1 ECU remap we expect 449bhp and 703Nm - up to 82bhp and 182Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 367 bhp | 449 bhp | +82 bhp |
| Torque | 521 Nm | 703 Nm | +182 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 367 bhp | 521 Nm | |
| Stage 1Maximum software-only performance | 449 bhp | 703 Nm | +82 bhp +182 Nm |
| Stage 1 EcoPerformance with economy in mind | 429 bhp | 688 Nm | +62 bhp +167 Nm |
| Eco mapEconomy first | 422 bhp | 679 Nm | +55 bhp +158 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your GLE
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
This car is listed with a Bosch MED17.7 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Mercedes-Benz GLE 450 367bhp?
We expect 449bhp and 703Nm against 367bhp and 521Nm as standard: up to +82bhp and +182Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Mercedes-Benz GLE 450 367bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 429bhp and 688Nm expected. The Eco map is economy first: 422bhp and 679Nm. Both still sit above the standard 367bhp and 521Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Mercedes-Benz GLE figures
Other petrol variants
All petrol GLE variants · GLE 2015> overview · All Mercedes-Benz figures