Mercedes-Benz E Class (W211) 2006-2008 E320 CDI 220bhp remap figures
Stock, this 2006-2008 Mercedes-Benz E Class diesel (3.0L) produces 220bhp and 510Nm. Our expected figures for a Stage 1 remap are 295bhp and 606Nm, an expected gain of up to 75bhp and 96Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 220 bhp | 295 bhp | +75 bhp |
| Torque | 510 Nm | 606 Nm | +96 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 220 bhp | 510 Nm | |
| Stage 1Maximum software-only performance | 295 bhp | 606 Nm | +75 bhp +96 Nm |
| Stage 1 EcoPerformance with economy in mind | 276 bhp | 598 Nm | +56 bhp +88 Nm |
| Eco mapEconomy first | 270 bhp | 594 Nm | +50 bhp +84 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your E Class
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Bosch EDC16CP31 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Mercedes-Benz E Class E320 CDI 220bhp?
We expect 295bhp and 606Nm against 220bhp and 510Nm as standard: up to +75bhp and +96Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Mercedes-Benz E Class E320 CDI 220bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 276bhp and 598Nm expected. The Eco map is economy first: 270bhp and 594Nm. Both still sit above the standard 220bhp and 510Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Mercedes-Benz E Class figures
Other diesel variants
- E320 CDI 204bhp 2002-2005
- E280 CDI 187bhp 2006-2008
- E400 CDI 260bhp 2002-2005
- E270 CDI 177bhp 2002-2008
- E280 CDI 177bhp 2004-2005
- E220 CDI 167bhp 2002-2008
- E220 CDI 147bhp 2002-2008
All diesel E Class (W211) variants · E Class (W211) 2002-2008 overview · All Mercedes-Benz figures