Land Rover Range Rover Velar (L560) 2021> 3.0 P340 340bhp remap figures
The Land Rover Range Rover Velar 3.0 P340 340bhp (2021>) is a petrol 3.0L model making 340bhp and 480Nm as standard. After a Stage 1 ECU remap we expect 405bhp and 561Nm - up to 65bhp and 81Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 340 bhp | 405 bhp | +65 bhp |
| Torque | 480 Nm | 561 Nm | +81 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 340 bhp | 480 Nm | |
| Stage 1Maximum software-only performance | 405 bhp | 561 Nm | +65 bhp +81 Nm |
| Stage 1 EcoPerformance with economy in mind | 389 bhp | 555 Nm | +49 bhp +75 Nm |
| Eco mapEconomy first | 384 bhp | 550 Nm | +44 bhp +70 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Range Rover Velar
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
The ECU recorded for this variant is a Bosch MG1CS028. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Land Rover Range Rover Velar 3.0 P340 340bhp?
We expect 405bhp and 561Nm against 340bhp and 480Nm as standard: up to +65bhp and +81Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Land Rover Range Rover Velar 3.0 P340 340bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 389bhp and 555Nm expected. The Eco map is economy first: 384bhp and 550Nm. Both still sit above the standard 340bhp and 480Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Land Rover Range Rover Velar figures
Other petrol variants
All petrol Range Rover Velar (L560) variants · Range Rover Velar (L560) 2017> overview · All Land Rover figures