Land Rover Range Rover Velar (L560) 2017-2020 2.0 P300 296bhp remap figures
The Land Rover Range Rover Velar 2.0 P300 296bhp (2017-2020) is a petrol 2.0L model making 296bhp and 400Nm as standard. After a Stage 1 ECU remap we expect 347bhp and 530Nm - up to 51bhp and 130Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 296 bhp | 347 bhp | +51 bhp |
| Torque | 400 Nm | 530 Nm | +130 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 296 bhp | 400 Nm | |
| Stage 1Maximum software-only performance | 347 bhp | 530 Nm | +51 bhp +130 Nm |
| Stage 1 EcoPerformance with economy in mind | 334 bhp | 520 Nm | +38 bhp +120 Nm |
| Eco mapEconomy first | 330 bhp | 513 Nm | +34 bhp +113 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Range Rover Velar
Naturally aspirated petrol engines have no boost to raise, so gains from software alone are more modest than on a turbocharged car and come from fuelling, ignition and throttle response.
This car is listed with a Bosch MED17.9.9 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Land Rover Range Rover Velar 2.0 P300 296bhp?
We expect 347bhp and 530Nm against 296bhp and 400Nm as standard: up to +51bhp and +130Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Land Rover Range Rover Velar 2.0 P300 296bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 334bhp and 520Nm expected. The Eco map is economy first: 330bhp and 513Nm. Both still sit above the standard 296bhp and 400Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Land Rover Range Rover Velar figures
Other petrol variants
All petrol Range Rover Velar (L560) variants · Range Rover Velar (L560) 2017> overview · All Land Rover figures