Land Rover Range Rover Velar (L560) 2017-2020 2.0 P250 246bhp remap figures
Thinking of remapping a Land Rover Range Rover Velar 2.0 P250 246bhp? The standard car makes 246bhp and 365Nm; with a Stage 1 remap from our Leicester workshop we expect around 305bhp and 439Nm, up to +59bhp and +74Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 246 bhp | 305 bhp | +59 bhp |
| Torque | 365 Nm | 439 Nm | +74 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 246 bhp | 365 Nm | |
| Stage 1Maximum software-only performance | 305 bhp | 439 Nm | +59 bhp +74 Nm |
| Stage 1 EcoPerformance with economy in mind | 290 bhp | 433 Nm | +44 bhp +68 Nm |
| Eco mapEconomy first | 286 bhp | 429 Nm | +40 bhp +64 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Range Rover Velar
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
This car is listed with a Bosch MED17.9.9 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Land Rover Range Rover Velar 2.0 P250 246bhp?
We expect 305bhp and 439Nm against 246bhp and 365Nm as standard: up to +59bhp and +74Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Land Rover Range Rover Velar 2.0 P250 246bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 290bhp and 433Nm expected. The Eco map is economy first: 286bhp and 429Nm. Both still sit above the standard 246bhp and 365Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Land Rover Range Rover Velar figures
Other petrol variants
All petrol Range Rover Velar (L560) variants · Range Rover Velar (L560) 2017> overview · All Land Rover figures