Iveco Trakker 2000> 7.8l T33 330bhp remap figures
Stock, this 2000> Iveco Trakker diesel (7.8L) produces 330bhp and 1401Nm. Our expected figures for a Stage 1 remap are 385bhp and 1551Nm, an expected gain of up to 55bhp and 150Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 330 bhp | 385 bhp | +55 bhp |
| Torque | 1401 Nm | 1551 Nm | +150 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 330 bhp | 1401 Nm | |
| Stage 1Maximum software-only performance | 385 bhp | 1551 Nm | +55 bhp +150 Nm |
| Stage 1 EcoPerformance with economy in mind | 371 bhp | 1539 Nm | +41 bhp +138 Nm |
| Eco mapEconomy first | 367 bhp | 1532 Nm | +37 bhp +131 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Trakker
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
This car is listed with a Bosch MS6.2 engine control unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Iveco Trakker 7.8l T33 330bhp?
We expect 385bhp and 1551Nm against 330bhp and 1401Nm as standard: up to +55bhp and +150Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Iveco Trakker 7.8l T33 330bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 371bhp and 1539Nm expected. The Eco map is economy first: 367bhp and 1532Nm. Both still sit above the standard 330bhp and 1401Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Iveco Trakker figures
Other diesel variants
- 7.8l T31 310bhp 2000>
- 7.8l T35 350bhp 2000>
- 7.8l T36 360bhp 2000>
- 12.9l T38 380bhp 2000>
- 7.8l T27 273bhp 2000>
- 12.9l T41 410bhp 2000>
- 10.3l T43 430bhp 2000>
- 12.9l T45 450bhp 2000>
- 12.9l T48 480bhp 2000>
- 12.9l T50 500bhp 2000>
All diesel Trakker variants · Trakker 2000> overview · All Iveco figures