Iveco Trakker 2000> 12.9l T38 380bhp remap figures
The Iveco Trakker 12.9l T38 380bhp (2000>) is a diesel 12.9L model making 380bhp and 1801Nm as standard. After a Stage 1 ECU remap we expect 445bhp and 2079Nm - up to 65bhp and 278Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 380 bhp | 445 bhp | +65 bhp |
| Torque | 1801 Nm | 2079 Nm | +278 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 380 bhp | 1801 Nm | |
| Stage 1Maximum software-only performance | 445 bhp | 2079 Nm | +65 bhp +278 Nm |
| Stage 1 EcoPerformance with economy in mind | 429 bhp | 2057 Nm | +49 bhp +256 Nm |
| Eco mapEconomy first | 424 bhp | 2043 Nm | +44 bhp +242 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Trakker
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
This car is listed with a Bosch MS6.2 engine control unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Iveco Trakker 12.9l T38 380bhp?
We expect 445bhp and 2079Nm against 380bhp and 1801Nm as standard: up to +65bhp and +278Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Iveco Trakker 12.9l T38 380bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 429bhp and 2057Nm expected. The Eco map is economy first: 424bhp and 2043Nm. Both still sit above the standard 380bhp and 1801Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Iveco Trakker figures
Other diesel variants
- 7.8l T36 360bhp 2000>
- 7.8l T35 350bhp 2000>
- 12.9l T41 410bhp 2000>
- 7.8l T33 330bhp 2000>
- 10.3l T43 430bhp 2000>
- 7.8l T31 310bhp 2000>
- 12.9l T45 450bhp 2000>
- 12.9l T48 480bhp 2000>
- 7.8l T27 273bhp 2000>
- 12.9l T50 500bhp 2000>
All diesel Trakker variants · Trakker 2000> overview · All Iveco figures