Iveco Trakker 2000> 12.9l T48 480bhp remap figures
The Iveco Trakker 12.9l T48 480bhp (2000>) is a diesel 12.9L model making 480bhp and 2201Nm as standard. After a Stage 1 ECU remap we expect 545bhp and 2479Nm - up to 65bhp and 278Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 480 bhp | 545 bhp | +65 bhp |
| Torque | 2201 Nm | 2479 Nm | +278 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 480 bhp | 2201 Nm | |
| Stage 1Maximum software-only performance | 545 bhp | 2479 Nm | +65 bhp +278 Nm |
| Stage 1 EcoPerformance with economy in mind | 529 bhp | 2457 Nm | +49 bhp +256 Nm |
| Eco mapEconomy first | 524 bhp | 2443 Nm | +44 bhp +242 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Trakker
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Bosch EDC7U31. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Iveco Trakker 12.9l T48 480bhp?
We expect 545bhp and 2479Nm against 480bhp and 2201Nm as standard: up to +65bhp and +278Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Iveco Trakker 12.9l T48 480bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 529bhp and 2457Nm expected. The Eco map is economy first: 524bhp and 2443Nm. Both still sit above the standard 480bhp and 2201Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Iveco Trakker figures
Other diesel variants
- 12.9l T50 500bhp 2000>
- 12.9l T45 450bhp 2000>
- 10.3l T43 430bhp 2000>
- 12.9l T41 410bhp 2000>
- 12.9l T38 380bhp 2000>
- 7.8l T36 360bhp 2000>
- 7.8l T35 350bhp 2000>
- 7.8l T33 330bhp 2000>
- 7.8l T31 310bhp 2000>
- 7.8l T27 273bhp 2000>
All diesel Trakker variants · Trakker 2000> overview · All Iveco figures