Iveco EuroTrakker 1998-2004 12.9l E44 440bhp remap figures
Stock, this 1998-2004 Iveco EuroTrakker diesel (12.9L) produces 440bhp and 2100Nm. Our expected figures for a Stage 1 remap are 505bhp and 2378Nm, an expected gain of up to 65bhp and 278Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 440 bhp | 505 bhp | +65 bhp |
| Torque | 2100 Nm | 2378 Nm | +278 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 440 bhp | 2100 Nm | |
| Stage 1Maximum software-only performance | 505 bhp | 2378 Nm | +65 bhp +278 Nm |
| Stage 1 EcoPerformance with economy in mind | 489 bhp | 2356 Nm | +49 bhp +256 Nm |
| Eco mapEconomy first | 484 bhp | 2342 Nm | +44 bhp +242 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your EuroTrakker
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Bosch MS6.2. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Iveco EuroTrakker 12.9l E44 440bhp?
We expect 505bhp and 2378Nm against 440bhp and 2100Nm as standard: up to +65bhp and +278Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Iveco EuroTrakker 12.9l E44 440bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 489bhp and 2356Nm expected. The Eco map is economy first: 484bhp and 2342Nm. Both still sit above the standard 440bhp and 2100Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Iveco EuroTrakker figures
Other diesel variants
- 13.8l E42 420bhp 1998-2004
- 12.9l E48 480bhp 1998-2004
- 9.5l E38 380bhp 1998-2004
- 9.5l E37 375bhp 1998-2004
- 9.5l E35 350bhp 1998-2004
- 5.9l E34 345bhp 1998-2004
- 5.9l E30 300bhp 1998-2004
- 5.9l E27 273bhp 1998-2004
- 5.9l E24 245bhp 1998-2004
All diesel EuroTrakker variants · EuroTrakker 1998-2004 overview · All Iveco figures