BMW 2 Series (F2X) 2018> M2 Comp 410bhp remap figures
The BMW 2 Series M2 Comp 410bhp (2018>) is a petrol 3.0L model making 410bhp and 551Nm as standard. After a Stage 1 ECU remap we expect 503bhp and 721Nm - up to 93bhp and 170Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 410 bhp | 503 bhp | +93 bhp |
| Torque | 551 Nm | 721 Nm | +170 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 410 bhp | 551 Nm | |
| Stage 1Maximum software-only performance | 503 bhp | 721 Nm | +93 bhp +170 Nm |
| Stage 1 EcoPerformance with economy in mind | 480 bhp | 707 Nm | +70 bhp +156 Nm |
| Eco mapEconomy first | 472 bhp | 699 Nm | +62 bhp +148 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your 2 Series
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
This car is listed with a Bosch MEVD17.2.6(G) engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the BMW 2 Series M2 Comp 410bhp?
We expect 503bhp and 721Nm against 410bhp and 551Nm as standard: up to +93bhp and +170Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the BMW 2 Series M2 Comp 410bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 480bhp and 707Nm expected. The Eco map is economy first: 472bhp and 699Nm. Both still sit above the standard 410bhp and 551Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More BMW 2 Series figures
Other petrol variants
- M2 CS 443bhp 2018>
- M2 364bhp 2016>
- M240i 335bhp 2016>
- M235i 322bhp 2014>
- 230i (B48) 248bhp 2017>
- 228i (N20) 241bhp 2014-2017
- 225i (N20) 227bhp 2014-2017
- 225xe (1.5) 220bhp 2016>
- 220i (B48) 181bhp 2017>
- 218i 138bhp 2020>
All petrol 2 Series (F2X) variants · 2 Series (F2X) 2014-2021 overview · All BMW figures