BMW 2 Series (F2X) 2016> 225xe (1.5) 220bhp remap figures
Stock, this 2016> BMW 2 Series petrol (1.5L) produces 220bhp and 521Nm. Our expected figures for a Stage 1 remap are 266bhp and 580Nm, an expected gain of up to 46bhp and 59Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 220 bhp | 266 bhp | +46 bhp |
| Torque | 521 Nm | 580 Nm | +59 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 220 bhp | 521 Nm | |
| Stage 1Maximum software-only performance | 266 bhp | 580 Nm | +46 bhp +59 Nm |
| Stage 1 EcoPerformance with economy in mind | 255 bhp | 575 Nm | +35 bhp +54 Nm |
| Eco mapEconomy first | 251 bhp | 572 Nm | +31 bhp +51 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your 2 Series
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
This car is listed with a Bosch MEVD17.2.3 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the BMW 2 Series 225xe (1.5) 220bhp?
We expect 266bhp and 580Nm against 220bhp and 521Nm as standard: up to +46bhp and +59Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the BMW 2 Series 225xe (1.5) 220bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 255bhp and 575Nm expected. The Eco map is economy first: 251bhp and 572Nm. Both still sit above the standard 220bhp and 521Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More BMW 2 Series figures
Other petrol variants
- 225i (N20) 227bhp 2014-2017
- 228i (N20) 241bhp 2014-2017
- 230i (B48) 248bhp 2017>
- 220i (B48) 181bhp 2017>
- 218i 138bhp 2020>
- 218i 134bhp 2014>
- M235i 322bhp 2014>
- M240i 335bhp 2016>
- M2 364bhp 2016>
- M2 Comp 410bhp 2018>
All petrol 2 Series (F2X) variants · 2 Series (F2X) 2014-2021 overview · All BMW figures