Audi A7 (4G) 2010> 3.0T FSI 295bhp remap figures
The Audi A7 3.0T FSI 295bhp (2010>) is a petrol 3.0L model making 295bhp and 441Nm as standard. After a Stage 1 ECU remap we expect 395bhp and 541Nm - up to 100bhp and 100Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 295 bhp | 395 bhp | +100 bhp |
| Torque | 441 Nm | 541 Nm | +100 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 295 bhp | 441 Nm | |
| Stage 1Maximum software-only performance | 395 bhp | 541 Nm | +100 bhp +100 Nm |
| Stage 1 EcoPerformance with economy in mind | 370 bhp | 533 Nm | +75 bhp +92 Nm |
| Eco mapEconomy first | 362 bhp | 528 Nm | +67 bhp +87 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your A7
Naturally aspirated petrol engines have no boost to raise, so gains from software alone are more modest than on a turbocharged car and come from fuelling, ignition and throttle response.
This car is listed with a Continental Simos 8.5 engine control unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi A7 3.0T FSI 295bhp?
We expect 395bhp and 541Nm against 295bhp and 441Nm as standard: up to +100bhp and +100Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi A7 3.0T FSI 295bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 370bhp and 533Nm expected. The Eco map is economy first: 362bhp and 528Nm. Both still sit above the standard 295bhp and 441Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Audi A7 figures
Other petrol variants
All petrol A7 (4G) variants · A7 (4G) 2010-2018 overview · All Audi figures