Audi A6 (C6) 2004-2011 2.0 TFSI 167bhp remap figures
Thinking of remapping a Audi A6 2.0 TFSI 167bhp? The standard car makes 167bhp and 279Nm; with a Stage 1 remap from our Leicester workshop we expect around 230bhp and 349Nm, up to +63bhp and +70Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 167 bhp | 230 bhp | +63 bhp |
| Torque | 279 Nm | 349 Nm | +70 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 167 bhp | 279 Nm | |
| Stage 1Maximum software-only performance | 230 bhp | 349 Nm | +63 bhp +70 Nm |
| Stage 1 EcoPerformance with economy in mind | 214 bhp | 343 Nm | +47 bhp +64 Nm |
| Eco mapEconomy first | 209 bhp | 340 Nm | +42 bhp +61 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your A6
On a turbocharged petrol engine a remap adjusts boost, ignition timing and fuelling together, so both power and mid-range torque rise and the car pulls harder out of corners and junctions.
Engine management is by a Bosch MED9.1.5 unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi A6 2.0 TFSI 167bhp?
We expect 230bhp and 349Nm against 167bhp and 279Nm as standard: up to +63bhp and +70Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi A6 2.0 TFSI 167bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 214bhp and 343Nm expected. The Eco map is economy first: 209bhp and 340Nm. Both still sit above the standard 167bhp and 279Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.