Audi A6 (C6) 2004-2011 3.0 TDI 201bhp remap figures
Stock, this 2004-2011 Audi A6 diesel (3.0L) produces 201bhp and 400Nm. Our expected figures for a Stage 1 remap are 260bhp and 480Nm, an expected gain of up to 59bhp and 80Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 201 bhp | 260 bhp | +59 bhp |
| Torque | 400 Nm | 480 Nm | +80 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 201 bhp | 400 Nm | |
| Stage 1Maximum software-only performance | 260 bhp | 480 Nm | +59 bhp +80 Nm |
| Stage 1 EcoPerformance with economy in mind | 245 bhp | 474 Nm | +44 bhp +74 Nm |
| Eco mapEconomy first | 241 bhp | 470 Nm | +40 bhp +70 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your A6
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Bosch EDC17. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi A6 3.0 TDI 201bhp?
We expect 260bhp and 480Nm against 201bhp and 400Nm as standard: up to +59bhp and +80Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi A6 3.0 TDI 201bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 245bhp and 474Nm expected. The Eco map is economy first: 241bhp and 470Nm. Both still sit above the standard 201bhp and 400Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Audi A6 figures
Other diesel variants
- 2.7 TDI 187bhp 2004-2011
- 3.0 TDI 221bhp 2004-2011
- 2.7 TDI 177bhp 2004-2011
- 3.0 TDI 229bhp 2004-2011
- 2.0 TDI CR 170bhp 2004-2011
- 3.0 TDI 236bhp 2004-2011
- 2.0 TDI PD 138bhp 2004-2011
- 2.0 TDI CR 134bhp 2004-2011
All diesel A6 (C6) variants · A6 (C6) 2004-2011 overview · All Audi figures