Audi A6 (C5) 1997-2004 4.2 V8 300bhp remap figures
The Audi A6 4.2 V8 300bhp (1997-2004) is a petrol 4.2L model making 300bhp and 400Nm as standard. After a Stage 1 ECU remap we expect 335bhp and 446Nm - up to 35bhp and 46Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 300 bhp | 335 bhp | +35 bhp |
| Torque | 400 Nm | 446 Nm | +46 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 300 bhp | 400 Nm | |
| Stage 1Maximum software-only performance | 335 bhp | 446 Nm | +35 bhp +46 Nm |
| Stage 1 EcoPerformance with economy in mind | 326 bhp | 442 Nm | +26 bhp +42 Nm |
| Eco mapEconomy first | 323 bhp | 440 Nm | +23 bhp +40 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your A6
Naturally aspirated petrol engines have no boost to raise, so gains from software alone are more modest than on a turbocharged car and come from fuelling, ignition and throttle response.
The ECU recorded for this variant is a Bosch ME7.1.1. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi A6 4.2 V8 300bhp?
We expect 335bhp and 446Nm against 300bhp and 400Nm as standard: up to +35bhp and +46Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi A6 4.2 V8 300bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 326bhp and 442Nm expected. The Eco map is economy first: 323bhp and 440Nm. Both still sit above the standard 300bhp and 400Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.