Audi A5 2016> 3.0T FSI 333bhp remap figures
Stock, this 2016> Audi A5 petrol (3.0L) produces 333bhp and 441Nm. Our expected figures for a Stage 1 remap are 405bhp and 524Nm, an expected gain of up to 72bhp and 83Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 333 bhp | 405 bhp | +72 bhp |
| Torque | 441 Nm | 524 Nm | +83 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 333 bhp | 441 Nm | |
| Stage 1Maximum software-only performance | 405 bhp | 524 Nm | +72 bhp +83 Nm |
| Stage 1 EcoPerformance with economy in mind | 387 bhp | 517 Nm | +54 bhp +76 Nm |
| Eco mapEconomy first | 381 bhp | 513 Nm | +48 bhp +72 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your A5
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
Engine management is by a Continental Simos 16 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi A5 3.0T FSI 333bhp?
We expect 405bhp and 524Nm against 333bhp and 441Nm as standard: up to +72bhp and +83Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi A5 3.0T FSI 333bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 387bhp and 517Nm expected. The Eco map is economy first: 381bhp and 513Nm. Both still sit above the standard 333bhp and 441Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.