Audi A5 2016> 3.0 TDI 268bhp Stage 1 Eco remap figures
The Stage 1 Eco map for the Audi A5 3.0 TDI 268bhp (2016>): 303bhp and 664Nm expected from a standard 268bhp and 601Nm, up to +35bhp and +63Nm. It keeps most of the Stage 1 gain (Stage 1 is 315bhp and 669Nm) and is tuned with economy in mind: the choice if you want the performance and care what each tank costs.
Choose your map
Stage 1 Eco remap figures
Stage 1 Eco is performance with economy in mind. It keeps most of the Stage 1 gain, so the car still pulls well, but the map is shaped for efficient, relaxed driving rather than flat-out output. It is above the standard figures. We don't quote mpg, because economy depends on the car and how it is driven.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 268 bhp | 303 bhp | +35 bhp |
| Torque | 601 Nm | 664 Nm | +63 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 268 bhp | 601 Nm | |
| Stage 1Maximum software-only performance | 315 bhp | 669 Nm | +47 bhp +68 Nm |
| Stage 1 EcoPerformance with economy in mind | 303 bhp | 664 Nm | +35 bhp +63 Nm |
| Eco mapEconomy first | 299 bhp | 660 Nm | +31 bhp +59 Nm |
Who is the Stage 1 Eco map for?
- Drivers who want the pull of a remap for overtaking, motorways and towing, with the engine tuned with economy in mind.
- High-mileage drivers who want better performance and a more efficient everyday car in one map.
- Anyone who would otherwise take full Stage 1 but cares what each tank costs.
How Stage 1 Eco compares with Stage 1
Full Stage 1 on this Audi A5 is expected to give 315bhp and 669Nm (+47bhp, +68Nm). The Stage 1 Eco keeps about 74% of that power gain and 93% of the torque gain, so you get 303bhp and 664Nm: 12bhp less and 5Nm less than Stage 1, with the map shaped for efficient, relaxed driving, so it suits you if you want the pull and care about running costs. Both sit above the standard 268bhp and 601Nm.
What this means for your A5
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Bosch MD1CP004 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 Eco questions
How much power does the Stage 1 Eco map give the Audi A5 3.0 TDI 268bhp?
We expect 303bhp and 664Nm against 268bhp and 601Nm as standard: up to +35bhp and +63Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
How does Stage 1 Eco differ from Stage 1 on this engine?
Full Stage 1 is expected to give 315bhp and 669Nm. Stage 1 Eco gives 12bhp less and 5Nm less, in exchange for a map shaped with economy in mind. It still sits above the standard figures.
Is Stage 1 Eco or the Eco map better for me?
Choose Stage 1 Eco if you want the performance (303bhp and 664Nm) and still care about running costs. Choose the Eco map (299bhp and 660Nm) if economy matters more than pace.
Will the Stage 1 Eco map save fuel?
It is tuned with economy in mind while keeping most of the Stage 1 performance. We do not quote mpg figures, because economy depends on the car, its condition and how it is driven.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.