Volkswagen Transporter T6 2017> 2.0 TDi EU6 150bhp remap figures
The Volkswagen Transporter T6 2.0 TDi EU6 150bhp (2017>) is a diesel 2.0L model making 150bhp and 340Nm as standard. After a Stage 1 ECU remap we expect 198bhp and 458Nm - up to 48bhp and 118Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 150 bhp | 198 bhp | +48 bhp |
| Torque | 340 Nm | 458 Nm | +118 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 150 bhp | 340 Nm | |
| Stage 1Maximum software-only performance | 198 bhp | 458 Nm | +48 bhp +118 Nm |
| Stage 1 EcoPerformance with economy in mind | 186 bhp | 449 Nm | +36 bhp +109 Nm |
| Eco mapEconomy first | 182 bhp | 443 Nm | +32 bhp +103 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Transporter T6
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
This car is listed with a Delphi DCM6.2 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Volkswagen Transporter T6 2.0 TDi EU6 150bhp?
We expect 198bhp and 458Nm against 150bhp and 340Nm as standard: up to +48bhp and +118Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Volkswagen Transporter T6 2.0 TDi EU6 150bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 186bhp and 449Nm expected. The Eco map is economy first: 182bhp and 443Nm. Both still sit above the standard 150bhp and 340Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Volkswagen Transporter T6 figures
Other diesel variants
- 2.0 TDi EU5 140bhp 2016-2017
- 2.0 TDi EU5 180bhp 2016-2017
- 2.0 TDi EU6 102bhp 2017>
- 2.0 TDi EU6 204bhp 2017>
- 2.0 TDi EU6 84bhp 2017>
All diesel Transporter T6 variants · Transporter T6 2016> overview · All Volkswagen figures