Volkswagen Transporter T5 2010-2015 2.0 TDI 140bhp remap figures
The Volkswagen Transporter T5 2.0 TDI 140bhp (2010-2015) is a diesel 2.0L model making 140bhp and 340Nm as standard. After a Stage 1 ECU remap we expect 192bhp and 409Nm - up to 52bhp and 69Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 140 bhp | 192 bhp | +52 bhp |
| Torque | 340 Nm | 409 Nm | +69 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 140 bhp | 340 Nm | |
| Stage 1Maximum software-only performance | 192 bhp | 409 Nm | +52 bhp +69 Nm |
| Stage 1 EcoPerformance with economy in mind | 179 bhp | 403 Nm | +39 bhp +63 Nm |
| Eco mapEconomy first | 175 bhp | 400 Nm | +35 bhp +60 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Transporter T5
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Bosch EDC17CP20 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Volkswagen Transporter T5 2.0 TDI 140bhp?
We expect 192bhp and 409Nm against 140bhp and 340Nm as standard: up to +52bhp and +69Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Volkswagen Transporter T5 2.0 TDI 140bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 179bhp and 403Nm expected. The Eco map is economy first: 175bhp and 400Nm. Both still sit above the standard 140bhp and 340Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Volkswagen Transporter T5 figures
Other diesel variants
- 2.5 TDI PD 130bhp 2004-2006
- 2.5 TDI PD 130bhp 2007-2009
- 2.5 TDI PD 174bhp 2004-2006
- 2.5 TDI PD 174bhp 2007-2009
- 1.9 TDI PD 102bhp 2003-2006
- 1.9 TDI PD 102bhp 2007-2009
- 2.0 TDI 102bhp 2010-2015
- 2.0 BiTDI 180bhp 2010-2015
- 1.9 TDI PD 84bhp 2003-2006
- 1.9 TDI PD 84bhp 2007-2009
All diesel Transporter T5 variants · Transporter T5 2003-2015 overview · All Volkswagen figures