Volkswagen Polo (6R) 2009> 1.6 TDI CR 103bhp remap figures
The Volkswagen Polo 1.6 TDI CR 103bhp (2009>) is a diesel 1.6L model making 103bhp and 250Nm as standard. After a Stage 1 ECU remap we expect 155bhp and 324Nm - up to 52bhp and 74Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 103 bhp | 155 bhp | +52 bhp |
| Torque | 250 Nm | 324 Nm | +74 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 103 bhp | 250 Nm | |
| Stage 1Maximum software-only performance | 155 bhp | 324 Nm | +52 bhp +74 Nm |
| Stage 1 EcoPerformance with economy in mind | 142 bhp | 318 Nm | +39 bhp +68 Nm |
| Eco mapEconomy first | 138 bhp | 314 Nm | +35 bhp +64 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Polo
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
This car is listed with a Siemens Simos PCR2.1 engine control unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Volkswagen Polo 1.6 TDI CR 103bhp?
We expect 155bhp and 324Nm against 103bhp and 250Nm as standard: up to +52bhp and +74Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Volkswagen Polo 1.6 TDI CR 103bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 142bhp and 318Nm expected. The Eco map is economy first: 138bhp and 314Nm. Both still sit above the standard 103bhp and 250Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Volkswagen Polo figures
Other diesel variants
- 1.4 TDI 88bhp 2014-2015
- 1.4 TDI 88bhp 2014-2017
- 1.6 TDI CR 88bhp 2009>
- 1.2 TDI 73bhp 2010>
- 1.4 TDI 73bhp 2014-2015
- 1.4 TDI 73bhp 2014-2017
All diesel Polo (6R) variants · Polo (6R) 2009-2018 overview · All Volkswagen figures