Volkswagen LT 1996-2006 2.8 TDi 130bhp remap figures
The Volkswagen LT 2.8 TDi 130bhp (1996-2006) is a diesel 2.8L model making 130bhp and 300Nm as standard. After a Stage 1 ECU remap we expect 165bhp and 358Nm - up to 35bhp and 58Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 130 bhp | 165 bhp | +35 bhp |
| Torque | 300 Nm | 358 Nm | +58 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 130 bhp | 300 Nm | |
| Stage 1Maximum software-only performance | 165 bhp | 358 Nm | +35 bhp +58 Nm |
| Stage 1 EcoPerformance with economy in mind | 156 bhp | 353 Nm | +26 bhp +53 Nm |
| Eco mapEconomy first | 153 bhp | 350 Nm | +23 bhp +50 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your LT
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
This car is listed with a Bosch EDC15VM engine control unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Volkswagen LT 2.8 TDi 130bhp?
We expect 165bhp and 358Nm against 130bhp and 300Nm as standard: up to +35bhp and +58Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Volkswagen LT 2.8 TDi 130bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 156bhp and 353Nm expected. The Eco map is economy first: 153bhp and 350Nm. Both still sit above the standard 130bhp and 300Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Volkswagen LT figures
Other diesel variants
- 2.5 TDi 109bhp 1996-2006
- 2.8 TDi 158bhp 1996-2006
- 2.5 TDi 95bhp 1996-2006
- 2.5 TDi 88bhp 1996-2006
- 2.5 TDi 83bhp 1996-2006
All diesel LT variants · LT 1996-2006 overview · All Volkswagen figures