Volkswagen Amarok 2016> 3.0 V6 TDI 258bhp remap figures
Thinking of remapping a Volkswagen Amarok 3.0 V6 TDI 258bhp? The standard car makes 258bhp and 580Nm; with a Stage 1 remap from our Leicester workshop we expect around 319bhp and 686Nm, up to +61bhp and +106Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 258 bhp | 319 bhp | +61 bhp |
| Torque | 580 Nm | 686 Nm | +106 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 258 bhp | 580 Nm | |
| Stage 1Maximum software-only performance | 319 bhp | 686 Nm | +61 bhp +106 Nm |
| Stage 1 EcoPerformance with economy in mind | 304 bhp | 678 Nm | +46 bhp +98 Nm |
| Eco mapEconomy first | 299 bhp | 672 Nm | +41 bhp +92 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Amarok
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
Engine management is by a Bosch EDC17CP54 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Volkswagen Amarok 3.0 V6 TDI 258bhp?
We expect 319bhp and 686Nm against 258bhp and 580Nm as standard: up to +61bhp and +106Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Volkswagen Amarok 3.0 V6 TDI 258bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 304bhp and 678Nm expected. The Eco map is economy first: 299bhp and 672Nm. Both still sit above the standard 258bhp and 580Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Volkswagen Amarok figures
Other diesel variants
- 3.0 V6 TDI 224bhp 2016>
- 3.0 V6 TDI 204bhp 2016>
- 2.0 BiTDI 180bhp 2009>
- 2.0 BiTDI 163bhp 2009>
- 2.0 TDI 122bhp 2009>
All diesel Amarok variants · Amarok 2009> overview · All Volkswagen figures