SEAT Leon (5F) 2015> 2.0 TSI 285bhp remap figures
Thinking of remapping a SEAT Leon 2.0 TSI 285bhp? The standard car makes 285bhp and 350Nm; with a Stage 1 remap from our Leicester workshop we expect around 360bhp and 482Nm, up to +75bhp and +132Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 285 bhp | 360 bhp | +75 bhp |
| Torque | 350 Nm | 482 Nm | +132 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 285 bhp | 350 Nm | |
| Stage 1Maximum software-only performance | 360 bhp | 482 Nm | +75 bhp +132 Nm |
| Stage 1 EcoPerformance with economy in mind | 341 bhp | 471 Nm | +56 bhp +121 Nm |
| Eco mapEconomy first | 335 bhp | 465 Nm | +50 bhp +115 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Leon
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
Engine management is by a Continental Simos 12/18 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the SEAT Leon 2.0 TSI 285bhp?
We expect 360bhp and 482Nm against 285bhp and 350Nm as standard: up to +75bhp and +132Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the SEAT Leon 2.0 TSI 285bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 341bhp and 471Nm expected. The Eco map is economy first: 335bhp and 465Nm. Both still sit above the standard 285bhp and 350Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More SEAT Leon figures
Other petrol variants
- Cupra 276bhp 2014>
- Cupra 265bhp 2013>
- 1.8 TSi 177bhp 2013>
- 1.4 TSI 150bhp 2015>
- 1.5 TSi 147bhp 2017>
- 1.4 TSI 138bhp 2013>
- 1.4 TSI 123bhp 2014>
- 1.2 TSI 108bhp 2014>
- 1.2 TSI 103bhp 2013>
- 1.2 TSI 84bhp 2013>
All petrol Leon (5F) variants · Leon (5F) 2013-2020 overview · All SEAT figures