SEAT Alhambra (7N) 2013> 2.0 TDI CR 174bhp remap figures
The SEAT Alhambra 2.0 TDI CR 174bhp (2013>) is a diesel 2.0L model making 174bhp and 380Nm as standard. After a Stage 1 ECU remap we expect 233bhp and 495Nm - up to 59bhp and 115Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 174 bhp | 233 bhp | +59 bhp |
| Torque | 380 Nm | 495 Nm | +115 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 174 bhp | 380 Nm | |
| Stage 1Maximum software-only performance | 233 bhp | 495 Nm | +59 bhp +115 Nm |
| Stage 1 EcoPerformance with economy in mind | 218 bhp | 486 Nm | +44 bhp +106 Nm |
| Eco mapEconomy first | 214 bhp | 480 Nm | +40 bhp +100 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Alhambra
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Bosch EDC17C46 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the SEAT Alhambra 2.0 TDI CR 174bhp?
We expect 233bhp and 495Nm against 174bhp and 380Nm as standard: up to +59bhp and +115Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the SEAT Alhambra 2.0 TDI CR 174bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 218bhp and 486Nm expected. The Eco map is economy first: 214bhp and 480Nm. Both still sit above the standard 174bhp and 380Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More SEAT Alhambra figures
Other diesel variants
- 2.0 TDI CR 170bhp 2010>
- 2.0 TDI CR 181bhp 2015>
- 2.0 TDI CR 147bhp 2015>
- 2.0 TDI CR 138bhp 2010>
- 2.0 TDI CR 113bhp 2010>
All diesel Alhambra (7N) variants · Alhambra (7N) 2010> overview · All SEAT figures