SEAT Alhambra (7N) 2010> 2.0 TDI CR 113bhp remap figures
The SEAT Alhambra 2.0 TDI CR 113bhp (2010>) is a diesel 2.0L model making 113bhp and 281Nm as standard. After a Stage 1 ECU remap we expect 211bhp and 409Nm - up to 98bhp and 128Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 113 bhp | 211 bhp | +98 bhp |
| Torque | 281 Nm | 409 Nm | +128 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 113 bhp | 281 Nm | |
| Stage 1Maximum software-only performance | 211 bhp | 409 Nm | +98 bhp +128 Nm |
| Stage 1 EcoPerformance with economy in mind | 187 bhp | 399 Nm | +74 bhp +118 Nm |
| Eco mapEconomy first | 179 bhp | 392 Nm | +66 bhp +111 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Alhambra
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
This car is listed with a Bosch EDC17CP14/C46 engine control unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the SEAT Alhambra 2.0 TDI CR 113bhp?
We expect 211bhp and 409Nm against 113bhp and 281Nm as standard: up to +98bhp and +128Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the SEAT Alhambra 2.0 TDI CR 113bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 187bhp and 399Nm expected. The Eco map is economy first: 179bhp and 392Nm. Both still sit above the standard 113bhp and 281Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More SEAT Alhambra figures
Other diesel variants
- 2.0 TDI CR 138bhp 2010>
- 2.0 TDI CR 147bhp 2015>
- 2.0 TDI CR 170bhp 2010>
- 2.0 TDI CR 174bhp 2013>
- 2.0 TDI CR 181bhp 2015>
All diesel Alhambra (7N) variants · Alhambra (7N) 2010> overview · All SEAT figures