Porsche Macan (95B) 2014> Turbo PDK 394bhp remap figures
Thinking of remapping a Porsche Macan Turbo PDK 394bhp? The standard car makes 394bhp and 551Nm; with a Stage 1 remap from our Leicester workshop we expect around 455bhp and 629Nm, up to +61bhp and +78Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 394 bhp | 455 bhp | +61 bhp |
| Torque | 551 Nm | 629 Nm | +78 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 394 bhp | 551 Nm | |
| Stage 1Maximum software-only performance | 455 bhp | 629 Nm | +61 bhp +78 Nm |
| Stage 1 EcoPerformance with economy in mind | 440 bhp | 623 Nm | +46 bhp +72 Nm |
| Eco mapEconomy first | 435 bhp | 619 Nm | +41 bhp +68 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Macan
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
This car is listed with a Continental SDI10-10.2 engine control unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Porsche Macan Turbo PDK 394bhp?
We expect 455bhp and 629Nm against 394bhp and 551Nm as standard: up to +61bhp and +78Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Porsche Macan Turbo PDK 394bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 440bhp and 623Nm expected. The Eco map is economy first: 435bhp and 619Nm. Both still sit above the standard 394bhp and 551Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.