Porsche Macan (95B) 2019> 2.9 V6 Turbo S 434bhp remap figures
Stock, this 2019> Porsche Macan petrol (2.9L) produces 434bhp and 551Nm. Our expected figures for a Stage 1 remap are 515bhp and 764Nm, an expected gain of up to 81bhp and 213Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 434 bhp | 515 bhp | +81 bhp |
| Torque | 551 Nm | 764 Nm | +213 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 434 bhp | 551 Nm | |
| Stage 1Maximum software-only performance | 515 bhp | 764 Nm | +81 bhp +213 Nm |
| Stage 1 EcoPerformance with economy in mind | 495 bhp | 747 Nm | +61 bhp +196 Nm |
| Eco mapEconomy first | 488 bhp | 736 Nm | +54 bhp +185 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Macan
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
The ECU recorded for this variant is a Bosch MG1CS002. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Porsche Macan 2.9 V6 Turbo S 434bhp?
We expect 515bhp and 764Nm against 434bhp and 551Nm as standard: up to +81bhp and +213Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Porsche Macan 2.9 V6 Turbo S 434bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 495bhp and 747Nm expected. The Eco map is economy first: 488bhp and 736Nm. Both still sit above the standard 434bhp and 551Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Porsche Macan figures
Other petrol variants
- Turbo PDK 394bhp 2014>
- 2.9 V6 GTS 374bhp 2019>
- S PDK 354bhp 2019>
- GTS PDK 354bhp 2014-2018
- S PDK 335bhp 2014-2018
- 2.0T 248bhp 2014>
- 2.0T 233bhp 2014>
All petrol Macan (95B) variants · Macan (95B) 2014> overview · All Porsche figures