Porsche 911 (997) 2005-2011 GT3 428bhp remap figures
The Porsche 911 GT3 428bhp (2005-2011) is a petrol 3.8L model making 428bhp and 430Nm as standard. After a Stage 1 ECU remap we expect 465bhp and 452Nm - up to 37bhp and 22Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 428 bhp | 465 bhp | +37 bhp |
| Torque | 430 Nm | 452 Nm | +22 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 428 bhp | 430 Nm | |
| Stage 1Maximum software-only performance | 465 bhp | 452 Nm | +37 bhp +22 Nm |
| Stage 1 EcoPerformance with economy in mind | 456 bhp | 450 Nm | +28 bhp +20 Nm |
| Eco mapEconomy first | 453 bhp | 449 Nm | +25 bhp +19 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your 911
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
Engine management is by a Bosch ME7.8 unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Porsche 911 GT3 428bhp?
We expect 465bhp and 452Nm against 428bhp and 430Nm as standard: up to +37bhp and +22Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Porsche 911 GT3 428bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 456bhp and 450Nm expected. The Eco map is economy first: 453bhp and 449Nm. Both still sit above the standard 428bhp and 430Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Porsche 911 figures
Other petrol variants
- GT3 RS 443bhp 2005-2011
- GT3 409bhp 2005-2011
- Sport Classic 402bhp 2005-2011
- Turbo 473bhp 2005-2011
- S 379bhp 2005-2011
- Turbo 493bhp 2005-2011
- GT3 RS 493bhp 2005-2011
- Carrera S 350bhp 2005-2011
- PDK 340bhp 2005-2011
- Turbo S PDK 522bhp 2005-2011
All petrol 911 (997) variants ยท 911 (997) 2005-2011 overview ยท All Porsche figures
