Peugeot Bipper 2009> 1.4 HDi 68bhp remap figures
The Peugeot Bipper 1.4 HDi 68bhp (2009>) is a diesel 1.4L model making 68bhp and 163Nm as standard. After a Stage 1 ECU remap we expect 102bhp and 215Nm - up to 34bhp and 52Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 68 bhp | 102 bhp | +34 bhp |
| Torque | 163 Nm | 215 Nm | +52 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 68 bhp | 163 Nm | |
| Stage 1Maximum software-only performance | 102 bhp | 215 Nm | +34 bhp +52 Nm |
| Stage 1 EcoPerformance with economy in mind | 94 bhp | 211 Nm | +26 bhp +48 Nm |
| Eco mapEconomy first | 91 bhp | 208 Nm | +23 bhp +45 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Bipper
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
This car is listed with a Bosch EDC16C34 engine control unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Peugeot Bipper 1.4 HDi 68bhp?
We expect 102bhp and 215Nm against 68bhp and 163Nm as standard: up to +34bhp and +52Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Peugeot Bipper 1.4 HDi 68bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 94bhp and 211Nm expected. The Eco map is economy first: 91bhp and 208Nm. Both still sit above the standard 68bhp and 163Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Peugeot Bipper figures
Other diesel variants
All diesel Bipper variants · Bipper 2009> overview · All Peugeot figures