Peugeot Bipper 2009> 1.3 HDi 75bhp remap figures
Thinking of remapping a Peugeot Bipper 1.3 HDi 75bhp? The standard car makes 75bhp and 190Nm; with a Stage 1 remap from our Leicester workshop we expect around 100bhp and 230Nm, up to +25bhp and +40Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 75 bhp | 100 bhp | +25 bhp |
| Torque | 190 Nm | 230 Nm | +40 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 75 bhp | 190 Nm | |
| Stage 1Maximum software-only performance | 100 bhp | 230 Nm | +25 bhp +40 Nm |
| Stage 1 EcoPerformance with economy in mind | 94 bhp | 227 Nm | +19 bhp +37 Nm |
| Eco mapEconomy first | 92 bhp | 225 Nm | +17 bhp +35 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Bipper
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
Engine management is by a Marelli MJ8DF unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Peugeot Bipper 1.3 HDi 75bhp?
We expect 100bhp and 230Nm against 75bhp and 190Nm as standard: up to +25bhp and +40Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Peugeot Bipper 1.3 HDi 75bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 94bhp and 227Nm expected. The Eco map is economy first: 92bhp and 225Nm. Both still sit above the standard 75bhp and 190Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Peugeot Bipper figures
Other diesel variants
All diesel Bipper variants · Bipper 2009> overview · All Peugeot figures