Mitsubishi L200 2006-2015 2.5 DI-D 175bhp remap figures
The Mitsubishi L200 2.5 DI-D 175bhp (2006-2015) is a diesel 2.5L model making 175bhp and 400Nm as standard. After a Stage 1 ECU remap we expect 216bhp and 473Nm - up to 41bhp and 73Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 175 bhp | 216 bhp | +41 bhp |
| Torque | 400 Nm | 473 Nm | +73 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 175 bhp | 400 Nm | |
| Stage 1Maximum software-only performance | 216 bhp | 473 Nm | +41 bhp +73 Nm |
| Stage 1 EcoPerformance with economy in mind | 206 bhp | 467 Nm | +31 bhp +67 Nm |
| Eco mapEconomy first | 202 bhp | 464 Nm | +27 bhp +64 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your L200
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
This car is listed with a Denso RHF4 engine control unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Mitsubishi L200 2.5 DI-D 175bhp?
We expect 216bhp and 473Nm against 175bhp and 400Nm as standard: up to +41bhp and +73Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Mitsubishi L200 2.5 DI-D 175bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 206bhp and 467Nm expected. The Eco map is economy first: 202bhp and 464Nm. Both still sit above the standard 175bhp and 400Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Mitsubishi L200 figures
Other diesel variants
- 2.5 DI-D 171bhp 2006-2015
- 2.5 DI-D 167bhp 2006-2015
- 2.5 DI-D 163bhp 2006-2015
- 2.5 DI-D 134bhp 2006-2015
All diesel L200 variants · L200 2006-2015 overview · All Mitsubishi figures