Mercedes-Benz Trucks Atego 1998-2004 2528 279bhp remap figures
Stock, this 1998-2004 Mercedes-Benz Trucks Atego diesel (6.4L) produces 279bhp and 1100Nm. Our expected figures for a Stage 1 remap are 325bhp and 1270Nm, an expected gain of up to 46bhp and 170Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 279 bhp | 325 bhp | +46 bhp |
| Torque | 1100 Nm | 1270 Nm | +170 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 279 bhp | 1100 Nm | |
| Stage 1Maximum software-only performance | 325 bhp | 1270 Nm | +46 bhp +170 Nm |
| Stage 1 EcoPerformance with economy in mind | 314 bhp | 1256 Nm | +35 bhp +156 Nm |
| Eco mapEconomy first | 310 bhp | 1248 Nm | +31 bhp +148 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Atego
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Temic. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Mercedes-Benz Trucks Atego 2528 279bhp?
We expect 325bhp and 1270Nm against 279bhp and 1100Nm as standard: up to +46bhp and +170Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Mercedes-Benz Trucks Atego 2528 279bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 314bhp and 1256Nm expected. The Eco map is economy first: 310bhp and 1248Nm. Both still sit above the standard 279bhp and 1100Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Mercedes-Benz Trucks Atego figures
Other diesel variants
- 1228 279bhp 2004>
- 1328 279bhp 1998>
- 1528 279bhp 2004>
- 1828 279bhp 1998-2004
- 2628 279bhp 1998-2004
- 1229 285bhp 2004>
- 1329 285bhp 2004>
- 1529 286bhp 2004>
- 1526 256bhp 2004>
- 1226 255bhp 2004>
All diesel Atego variants · Atego 1998> overview · All Mercedes-Benz Trucks figures